Euro-Pro Shark Rapido Electronic Iron - White/Gray "repair cord model" Questions

...heating up, the power button is not lighting up. What is the solution? KENWOOD MODEL 848 broken cord at the plug or iron control in iron faulty repairs other than a cord will be more than a new ...

model DX1700, less than a year old. It will not heat. Is there an iron made that will give satisfactory service for more than a year? Are they repairable? If the cord and plug are ok (the wires in the

...setting, more than likely there is a break in one of the conductors in the power cord. I just repaired mine yesterday. It's just a matter of removing the 2 tamper resistant screws holding ...

...cord from the iron: Depending on the model of your iron, you may need to remove a cover or panel to access the cord. Look for any screws or clips that hold the cover in place and remove them using a ...

...model dm 860 loose power cord I have a Rowenta Luxe model DM 860. The power intermittently turns on and off when moving the power cable around. Can the power cord be replaced? There are two Torx ...

...cord on my Rowenta (Model DE880) steam iron lasts about 6 months. The black or white wire keeps braking after about 6 months of use. I'm a retired navy ET and electrical engineer. I took Iron back to ...

cord started heating up really bad where it starts (closest to the iron) Seems like it has melted and will not turn on at all anymore... Any suggestions??? I also tried taking it apart and it seems to

...cord replacement. Please let me know if this is possible. Thanks! Timothy Not familiar with that newer model, but here is the local dealer who is most helpful in California: California Electric ...

Repair of Steam Iron Iron has a short circuit to earth and having taken the screws from the rear i find that the body is still attached to the base plate. How can I release the top body from the base ...

...Model: gcsbcs-212 The outlet cord was bad (pinched from falling off the ironing board) inside where the cord goes into the iron. 1. Remove Bottom Sticker 2.Remove 2 Screws 3. Pry off Sunbeam Back ...