Insignia 600W Bridgeable Amplifier with 12" Subwoofer "type alpine" Questions

...alpine type R SWR-12D4 (4ohms+4ohms) 1000watts RMS-3000 watts peak. the rear speakers i would want to hook up only would be Alpine type S. SPS-619 coaxcil 3 way 260 watts peak 85 watts RMS. so with ...

...alpine type E subs to a alpine 500 watt monoblock amp Just connect both sets of wires from the subwoofers to the same speaker output terminals on the amplifier. Make sure you keep the positive and ...

...2 12 inch type R alpine subs on a mrv 1507 amp and it doesn't get to loud on bass This is how 2 type r's are wired to one amp at 2ohms hope this helps dont forget to rate me thanks Upfront Audio

...Alpine Type E 10" subwoofer hooked up to a Alpine MRP-M450 mono amplifier using 10 awg wiring in my '07 Honda CRV LX. I am still using a factory stock deck. (No premium sound system initially) It ...

...alpine type r's. When I turn the volume up to about 2/3 of the way the amp starts to cut in and out. What could cause this? I was thinking it was just a tuning problem. It sounds like the amp is at ...

...alpine mrd-m1005? I would say any decent pair of 12" or 15" (single 4 ohm voice coil) subs that can handle at least 500W rms would work. The rest is going to be based on cost, type of box, type of ...

...alpine type R's in 2ohm load and an alpine mrp-m500 for each sub my question is how high should i set the gain and the bass, i left the gain at normal 4v and the bass eq at normal just tell the subs ...

...alpine amp and 12 " type r in ported type r box wondering if i have the rca hooked up wrong the box has bridges the hookup so i assume that it would put me 2 ohm stable but not sure if i hookeed the ...

How and can u hook up 2 alpine type r 10s subs to alpine mrv -f300 4 channel amp?? Connect them in a Parallel circuit

ALPINE TYPE X WELL MY PROBLEM IS WITH MY AMP EVERYTIME I TURN IT UP A LITTLE IT GOES INTO PROTECT MODE WHAT CAN I DO TO FIX THIS? 1.take it back to who installed it and ask them to do it right. 2.your