...ribbon cable, put in index card both sides of ribbon cable. Also, cleaned ribbon cable with eraser. Reinserted ribbon cable to ERC board. Flipped circuitbreaker several times to shock sysem. No good ...
...ribbon cable to make sure that it is properly plugged in. If the ribbon cable is secure and you see no damage to it, I recommend that you unplug that cable and reassemble the oven. Reset the breaker ...
...ribbon cable from the front panel was not making good contact where it mated with the circuit board. Remove ribbon cable and clean contacts on ribbon cable. Replace cable and problem should resolve. ...
...ribbon cable that plugs into the relay board. The ribbon cable is actually two cables pressed together, which can be seperated by simply lifting them apart. The ribbon cable has a defect in that the ...
...ribbon cable that plugs into the relay board. The ribbon cable is actually two cables pressed together, which can be seperated by simply lifting them apart. The ribbon cable has a defect in that the ...
...ribbon cable that plugs into the relay board. The ribbon cable is actually two cables pressed together, which can be seperated by simply lifting them apart. The ribbon cable has a defect in that the ...
...ribbon cable on the back of the control panel. I bought a new panel as well and figured out it is the ribon cable connector in the back doesn't hold the ribbon well . I am looking for the part to ...
...ribbon cable. In cases with a metal touch panel, there could also be a short circuit between the ribbon cable and the edge of the slot in the touch panel. simply place a slip of paper in between the ...
Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs If code recurs, problem is in the control. Replace control. If code does not recur, problem is with the Key Panel. First
36 questions posted
Usually answered in minutes!
293 Questions
216 Questions
128 Questions
114 Questions
86 Questions