GE Spacemaker Washer and Dryer Electric Laundry Center "cycle control knob stuck" Questions

...click and select any other cycle. model Aquarius WMF740 Hi the problem is the shaft on the control knob is cracked so the knob turns but won't grip the shaft on the control panel requires an new ...

cycle Turning on the control panel immediately starts a wash cycle (normal/casual) without pressing the start button. Stopping, and/or pausing the machine still won't let you change the cycle when you

...control panel at cycle selecter knob indicater light says 'control locked'. display is stuck on 888 does not operate. how do i take the control panel off? Press "end of cycle" for 3 seconds. Its the ...

...has been spinning for hours. I tried unplugging it and plugging it back in and starting the cycle over. It stops if I push the knob in but thats the only thing different it does replace timer ...

...cycle. when it spins it should alternate draining water as it spins every few secounds,then it will spin up faster and finsh draing steadily.if it won,t drain during the spin mode then your control ...

...power for 60 seconds. Plug back in,then turn knob to reset.Then try another load of wash or finish the one that is stuck before rince cycle. It is possible the control timer is going

control knob has sheered the spindle on the settings dial. Is it an easy fix or is it a whole new board replacement The knob that turns the settings dial has broken and sheered off the peg it attaches

My whirlpool Duet dryer is stuck on Control Locked I dont know why this has happen but I cannot use my dryer due to this problem hold for 3 sec the End of cycle signal knob....

it gets stuck in what ever cycle its in Most often with this problem, the timer mechanism behind the main control knob has failed and needs to be replaced.

...cycle by letting the water run through. Easy check for water filling problem like yours. Unplug the power and see if water still flows into machine. If yes----your inlet valve on the washer is stuck ...