Insignia Digital-to-Analog Converter for Analog TVs "tv volume turns itself" Questions

...volume on this from my TV remote? I press the 'select' button on the TV remote and DVD lights up (and is still on) it allows me to do every function EXCEPT adjust the cinema systems volume! It's just ...

...tv volume and afterward make sure the tv volume is up too also go into the converter box itself and make sure it is not set to convert to any other language. it seems that maybe it might be trying to ...

...volume of the tv be set at? OFF. Unless the TV is the original source of what you're watching (antenna). Otherwise, your programming is probably coming from a cable/sat box with all the digital audio ...

volume down, but we need to not have this problem anyway. The source is your issue. The amplifier or TV itself. Try another TV plugged into the amp or some other sound source like a iPod, etc, to test

volume set at 25 or higher, it will slowly start turning itself up louder until it either maxes out, or I intervene. Either way, it's really annoying, even though I'm only using it as an amplifier for

...volume of the tv itself, so make sure to turn the volume on the tv up a llittle to make sure its sending signal. you may have to go into the tv menu and turn the internal tv speakers off so you dont ...

...tv the other night, the receiver began increasing the volume on its own. I lowered it w/the remote. It did it again after several minutes, and this time I could not fight it with my remote. I just ...

...TV volume won't affect the HTS volume. Then you can turn the TV speakers off and still listen through the HTS. You'll only get stereo this way. Ideally, you would have a digital audio source for the ...

...volume. I just got a new remote- same problem Maybe, just Maybe you could try turning the power off for the sub woofer, the zone next and then the Bose itself. Power up the woofer and zone before the ...

...tv the volume bar automatically pops on screen and goes all the way up to full volume then automatically goes down to zero. I tried unplugging it and replugging it to see if it might reset but that ...