Samsung 1.8 Cu. Ft. Over-the-Range Microwave "display stop working" Questions

...working, no display,not outlet suddenly stopped working, no display,not outlet , Kenmore countertop microwave model 565.60309000 april 2000 suddenly stopped working, item placed inside on paper ...

display Here are lock / unlock schemes for three recent Sanyo models: - Press and hold Stop/Cancel for 3 seconds - Press and hold Stop/Reset for 3 seconds or so - Press Stop/Clear five times Hopefully

...display stopped working. It is a Sharp R-320F. I have it 6 years. Seems like the display panel went bad. You can check for sure by unplagging the unit for 45 seconds and plugging it back in. If still ...

...Display is messed up, but I know about that problem. Light, fan, work. Stop and all other buttons on the panel won't work though. It sounds like has loose wires that are contacted to the display ...

...display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad. High Voltage Transformer If the microwave runs for a few seconds and stops the high ...

...working, no display the buttons on the front stopped working, light comes on inside but no display and no response from buttons except when I press the buttons at the top of the panel all 0000 then ...

...display : MW fault acknowledge with stop. Would be great if someone could identify fault as I am fed up eating salads. The microwave unit is faulty as you can read from the display or the controller ...

...display is OK The keyboard is working, the time rolls down when I press start, it stop when I press stop or when I open the door. I heard a little click when i press start or stop. Nothing else is ...

...stop/clear for 3 seconds until one long tone sounds and the display clears to show an outline if the display area. Repeat to unlock control, and return display to the time of day, if any pad is ...