Frigidaire Affinity 5.8 Cu. Ft. Electric Dryer "remove dryer control" Questions

dryer. Remove the two screws in the door area and the four screws from the top of the front panel and attaching it to the dryer cabinet. Pull the front panel forward then disconnect the interior light

dryer has no power. Remove the screws holding the top on at the back of the dryer. Standing in front of the dryer push down and slide the top away from you then lift. With the top removed you will see

dryer, remove the retaining screw to remove the switch. Slide a new switch into the socket and press it down until the release tab locks into place. If you removed a retaining screw, replace the screw

...dryer. Remove the screws holding the lower panel on. The screws will be between the floor and bottom panel. Behind the silver or brownish lint filter housing will be the thermal fuse that has 2 blue ...

...dryer lid off. Then if you need to remove the front, you'll need to remove steam-dispenser tray, and remove the screws there, and then on the other side of the control panel. Then once you remove the ...

dryer away from the back wall so that the control console can be raised without hitting the wall. Remove the single screw on each end of the control console that secures the control console housing to

...remove the front panel of my lg dryer Hey Nicholas CoccovizzoUnplug the dryer's 3-prong electrical cord from the power outlet.Pull the dryer away from the wall and turn to one side to access ...

...remove the dryer front by pulling up, disconect the door switch wire, and the lamp wire on the top if yours has a door lamp. make sure its unplugged before attempting, if you have issues call GE ...

...dryer, model # 471.98802890? The first thing I do is remove the top. Then I drop the splashplate and remove the controls. If this is the first time you have messed with it their are some zipties that ...

...dryer and remove the three screws attaching the top panel to the rear of the dryer then slide the panel rearward and lift it off. Remove the two screws attaching each side of the control panel to the ...