Maytag 30" Built-In Single Electric Wall Oven - Black "easy bake oven fixya" Questions

...bake element is the black, pencil- thick tube at the bottom of the oven. When the oven heats, the element glows red. This element has an expected life-span of several years. It may last for only one; ...

...bake.temperature. It was diagnosed by an independent repair service as the control panel with a $850 repair cost. Although he told me honestly that GE could repair it for less than that. Now nothing ...

...Bake option stopped working now. Although Bril is working. when I turn the knob to baking, the light is on, but the fire never comes up and nothing happens. What is the issue? Hello,  kokela I ...

easy-off and now the oven will not bake? What should I check? For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing. I

...bake, you may have a bad element. You can remove the element that is not working and check it for continuity and resistance with a multimeter. If there is no continuity or resistance, replace the ...

...bake temp on lower oven but the controls are frozen. I have to reset with circuit breaker. The time that it keeps working after circuit reset gets shorter and shorter: from a few days to a few hours. ...

...Oven Kitchen Appliance Cleaning Ideas Fast Easy... Why You Should Almost Never Use Your Oven Self Cleaning Function Stop Using Your Ovens Self Cleaning Feature It Does More Harm than Good Self ...

...bake pushbutton is not working. Do I need to replace the whole circuit board and if so where can i get one or is there easy fix Hello,  natural I was trying to help you out here. Maybe this will ...

...bake/broil/etc. selector switch, the problem may be with the thermostat. But it's not easy to check the selector switch or thermostat for proper operation. If you suspect a problem in this area, call ...

...Bake function (bottom burner) does not work...any ideas? Hello,  debbie I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in ...