Frigidaire 30" Self-Cleaning Slide-In Gas Range - White "flame oven" Questions

oven flame ignites but will then not increase to the larger size when oven switched on the flame ignites,but the flame refuses to go to the next stage to preheat the oven to the required setting. when

...oven flame my parkinson cowan oven is not reaching the right temperature.on first ignition the flame no longer gets high it stays low as if the oven has got to the correct temp,but its only warm ...

...flame in the oven is so small and takes for ever to heat up is because the oven igniter is weak and can not open the gas valve very much so hardly any gas flows resulting in a low flame size. By ...

...LP. The bottom flame in the oven is coming up through the bottom plate. I have adjusted the Oriface all the way down, and it makes no difference where it gets adjusted too the flame is still to

Oven Flame Can't adjust the oven flame on my Kenmore Gas Range. I have already adjust the gas orfice. Smokes up the oven , flames come up both sides into the oven (stove is brand new.) Hi still under ...

...Oven flame ignites but will then not go to the next stage to get to the required temperature. Moving the gas control knob has no effect on the flame size .This is the right hand oven (Main Oven) on ...

...oven flame be adjusted for the new parts? Generally adjustment would not be required. When first lit the flame would be at maximum power but reduce as the oven heats up and the thermostat takes ...

oven flame and gril flame do not increase from starter/low flame setting. grill flame also splutters. seems not enough gas not getting through. HI thanks for your question. the problem with your gas ...

...oven thermostat. So the question remains can the size of the pilot flame be adjusted? I am having the opposite problem with the pilot flame being too small so the gas valve opens but the gas will not ...

oven has a 3 try electronic spark control. It sounds like the flame sensor is not sensing the flame correctly and is locking out. I don't know if your model senses flame through the high voltage spark