GE Profile Spacemaker Over-the-Range Microwave "replace fan fuse" Questions

...and replacing a fuse or two. Thoughts? How do I access fuse? Worth repairing? If it was run without the fan a thermal protect device was more than likely taken out. Check for that and replace the

...has caused it. Clean the fan with switch-cleaner spray and make sure it is smooth running. Replace special fuse with identical version. Check lights before operation. Replace all covers before

fan, light, but when I turn on the microwave, it runs for 2-3 sec and the fuse blows again. Is there a short in the magnetron and will I need to replace it to avoid the fuse from blowing again? couple

amp;#39;nt work ! What can I do, a fuse to replace? Help me please The fan is critical in keeping the magnetron cool, possible causes are! defective door switch, bad motor, or no B+ getting to the fan

fuse the lights, fan, clock worked fine. The clock was reset. Pressed the start button again and heard the groaning sound for a second or two and the internal fuse blew again. Could be a lot of things

...replace the fuse. Bad fan motorLocate the fan and remove the leads. Again using the volt-ohm meter on RX1, check the terminals. If an infinity reading is displayed, it means that the fan has gone bad ...

...to find the light and inspect, check and replace it if necessary. You can inspect the fan at the same time and maybe discover why it isnt running if that is indeed the case. I hope this helps you ...

...replace the fuse. Bad fan motorLocate the fan and remove the leads. Again using the volt-ohm meter on RX1, check the terminals. If an infinity reading is displayed, it means that the fan has gone bad ...

fan) except it will no longer heat anything you put in it HI. in most cases, this will lead to a failed Heating device(magnetron tube).It would be wise to check the Magnetron cutoff fuse to be sure of

...here from Google. Bulb replacement on Kenmore Spacemaster Microwave not working. Is there a fuse somewhere that could be out? No if the fan works the fuse is fine; unplug and, check the bulb ...