Whirlpool 30" Self-Cleaning Freestanding Electric Range - White-on-White "range keypad working" Questions

...working ,burners are all fine and operating F2 means something is wrong with the keypad. Check that the keypad is firmly connected with the control board and press Cancel. If you get the code after a ...

keypad you'll need to replace the whole ERC. (Electronic Range Control) It's usually the most expensive part of the range. Good luck! I don't know if it will work for you, but, I had a similar problem

...range had the mesaage: F2:E3 and now F2:E1. Can diagnose the problem. Tom Wilson [email protected] F2 - E1Keypad cable unplugged 1. Check keypad connector for firm connection (keypad connects to ...

range oven. While trying to set self clean the "clean" light won't come on and the element doesn't get hot. hi there, does the keypad beep when you push the keys? if yes, the keypad is fine. make sure

...keypad. Try Cancel/Off and hold for 10 seconds. Then push every key several times to unstick. If that does not work unplug range and remove the access panel, disconnect the wire connections, then ...

...keypad Replace Electronic Range Control/Clock (ERC) F3 - E0Oven temperature sensor or oven temperature sensor fuse openedReplace oven temperature sensor or fuse F3 - E1Oven temperature sensor ...

...keypad. Try resetting the range by unplugging it or flipping the household circuit breaker off. This usually will clear most false error codes. Wait approximately ten minutes and if the error code ...

...keypad for a Whirlpool oven or range, http://www.FixYourBoard.com has replacements by Ledgestone Technologies. These units are backed with a 2 year warranty. Save your $ and save your oven from the ...

...range said F1. The burners work, but not the oven. Hi Error code F1 means that an error with the keypad has occurred. Usually it happens due to loose ribbon cable on the keypad or the electronic ...

...range control or a stuck key pad. First check the keypad by pressing each button one at a time. You should hear a click and feel it fully retract. If it does not replace the keypad. If the keypad is ...