GE 18.0 Cu. Ft. Frost-Free Top-Mount Refrigerator - Bisque-on-Bisque "hot frame refrigerator" Questions

...I just wanted to know why the freezer frame is hot. the freezer frame is hot because it is used to disipate the heat from the coil and keeps the door frame from condensations at the door

hot door frame My Kitchenaid refrigerator model #KSCS25INSS is very hot on the door frame where the fridge and freezer come together. It's so hot that it melts the ice in the icemaker, so I turned the

Hot Frame When either door is open, the frame column that seperates the refrigerator from the freezer is very hot to the touch. Normal or problem? the hot frame is due to poor or no air flow across ...

...hot and also the whole frame. I clean the coils and that did not help If you have a model with an energy saver switch turn the switch on. This reduces the heat to the mullion heater built into the ...

hot. What The door frame of my fridge is really hot. What is up with that? Your condenser fan, which is underneath around back behind the cardboard backing, is probably not running. It should run when

...door and freezer door get hot the rubber insulation for doors gets very hot Inside the frame is a warm bit of pipework, or sometimes a mullion heater, that stops the seal freezing to the

...normal. The condenser sends hot gas through the frame to stop the freezer door freezing to the frame. Check to see if you have a fan behind the condenser grill and make sure its running and ...

...hot around the door frame of the refrigertor mainly the middle strip. Everything else is fine. Hi, Here is a tip that I wrote about the reasons why the sides and/or seals could be getting hot on your ...

...frame is VERY HOT I have a Whirlpool Designer Style 20 Refrigerator. The external metal frame next to the door on the sides of the freezer is VERY HOT to the touch. Is this normal? Your condenser fan ...

frame really hot. What's wrong?what do I trouble shoot? It is common for manufactures to either install a heater around the freezer door frame or run a loop of the condenser coils around the frame. If