Saeco Odea Giro Espresso Maker - Black/Silver "water sensor" Questions

...water level sensor does not know it is running out so when the tank empties due to running dry, it never completes the cycle. Where the water basin goes, if you look at the back lower down, you will ...

...water sensor or to fix it? We are in Canada and the Saeco people said they will not honor the warranty on a machine that was bought in the US. Any ideas? Thanks Hi, Make sure everything is fitted in ...

...see them in for warranty repair because of this.The water level sensor is a white rectangular piece (1" x 1/2" x 1/4") located between the water tank and the grinder. Check out.Keep

...water tank sensor isn't working, you can trick the machine into working by attaching a small magnet, and taping it to the magnet on the dreg discard box. You will see a small metalic opening on the ...

water. Can select volume of dose. Just can't make coffee, no response to button. Tried holding a magnet to various places, with bean cover off, and dregs door open, and brew group out. No effects. Don

...water sensor level, near the turbine. I assume you tried to clean and oil the brewing block. This is a great video to diagnose your Odea: https://www.youtube.com/watch?v=ftOWLMhmpjU Good luck. Martin ...

...water and it is clean I had this problem once, i think it was the magnetic sensor for the door to the brew group. Make sure it is clean inside and properly closed. Hope it helps. In my case, cleaning ...

sensor inside the water container has either mineral build-up (scale) or a bit of coffee grounds stuck to it. Run a cycle with a retail coffee maker "cleaner solution" to clean the water reservoir, or

...water tank sensor isn't working, you can trick the machine into working by attaching a small magnet, and taping it to the magnet on the dreg discard box. You will see a small metalic opening on the ...

...sensor but this dosent seem to help.. Any ideas? is the water available for brewing? are there enough beans for brewing? is there anything that shipped with the unit blocking the grounds? I have the ...