Dacor DMT2420SS Microwave Oven "control panel working" Questions

Control panel on GE Profile Spacemaker microwave not working Control panel touchpad does not work; push buttons for Vent, etc. are ok and clock is working. Sometimes when I press the Vent button, I ...

control panel.5 Lift the control panel up and out to loosen. Look behind the control panel to ensure there are no metal tabs securing the control panel in place. If there are metal tabs, gently rotate

...control panel not working I had the same problem , it was finger touch control panel, when I cleaned with spray then it worked for some days . Finally to get ride of it , I changed control panel with ...

control panel r-220b pressing 2 does not work, sometimes 0 does not work all others work. on control panel r-220b pressing 2 does not work, sometimes 0 does not work all other numbers work. some times

...control panel frame or Bkt c/panel buttons don't work do i need to change the control panel frame or Bkt c/panel You will need to change the keypad along with the control board, because they ...

Control panel for GE microwave I've had my microwave for a little over two years and after 6 months, buttons 2, 5 and 7 stopped working. The "low" feature of the vent never worked. I was told I need ...

...board and see of everything works. if so replace the touch panel and send the control board back. If it still does not work then swap the control board and send the touch panel back. hope that ...

...control panel is malfunctioning. The censorfor external vent fan may not work due to faulty control panel. You need toreplace the control panel, so that microwave will work properly. Replacing anERC ...

...control board is most likely defective and will need to be replaced. Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably

...Control panel not working at all. Power outlet checked, and works perfectly. Any suggestions? Hello, fault is from the control board. Have the control board replaced and the control panel will be ...