Frigidaire GLEQ642A Electric Dryer "whirlpool humming sound" Questions

...HUMMING SOUND WHEN TURNED ON MY WIRLPOOL DRYER WAS WORKING BUT NO HEAT I TURNED IT OFF AND THEN TURNED IT BACK ON I HRARD A HUMMING SOUND WHAT CAN BE THE CAUSE Sounds like there's something in the ...

...Whirlpool dryer...Mod nu# WED5800SQ0, Ser nu# MU0740291 and the Type; DWJR-ELE 2406026-FM54.... My problem is a week ago the dryer stop spinnig, but when you close it you will hear a humming sound. I ...

WHY DOES THE DRYER ONLY HUM WHEN I TURN IT ON? MODEL #LX15701WO If the hum sounds like the motor is running, you may have a broken belt. If it sounds like the motor is jammed you may have a locked up ...

...humming sound Remove the drum belt & start it if it hums and starts hard you will need a motor. If it don't hum check the drum rollers & glides on the front. Check the idler pully and belt. ...

Whirlpool Estate Dryer won't work When you push the power button, there is a faint humming/ticking sound, but it doesn't start or turn. What could be the problem? I opened the dryer and the belt is ...

whirlpool dryer won't spin My dryer won't spin. I have taken off the top and the belt seems fine. I have opened the back but that doesn't make much sense to me. I have reset the ...

...Whirlpool Electric Dryer, Model # LEQ9508PW1-Dryer made a loud pop, the drum stopped turning, but the motor is humming. Spun the drum by hand, and dryer started working. This dryer isn't even two ...

humming sound I have a whirlpool, heavy duty super capacity 5 cycle 3 temperature electric dryer model # LER5636EQ1 put a load of clothes in the dryer and pressed the start button. Nothing happend but

...whirlpool LP Dryer model #LGR5848E. When I press the start switch I hear a humming and the dryer doesn't start. I have tested the thermal fuses with a meter and the switch, all test good. I tried to ...

WHIRLPOOL GAS DRYER MODEL LGR7646E IT MAKES HUMMING NOISE AT START, SOME TIMES IT WORKS, SOMETIMES IT JUST MAKES THE NOISE ANDIT STOPS WORKING AT ALL sounds like your motor is bad or the start relay ...