Frigidaire GLEQ2152ES Electric Dryer "drum turn" Questions

...drum turn it works. Too much drag on the Drum. Try lubricating the rollers that the drum turns on. Check the belt tensioner pully...lubricate that as necessary. If Drum still turns very hard after ...

...drum will not turn, even manually with the belt removed The dryer drum stopped turning. Prior to this problem we did notice an intermittent knocking sound. The drum will not even turn manually with ...

...Drum does not turn by hand. Only makes a sound when switch is turned on. If it is a sound like a loud hum, the motor is either fried or something is jammed preventing the drum from turning. It could ...

...drum wont turn Replaced old cracked drum with brand new drum, also replaced front rollers that were worn and chewed up from old drum. New drum will not turn. We have checked everything...it turns ...

...turn the drum manually when machine is off the noise is there drum has worn drum bearing dryer top AND rear panel must be removed to acess the rear of drum to replace drum I have a new LG gas dryer. ...

Drum won't turn on the dryer on inglis Drum won't turn? Check the Belt?? Or do you mean you can't turn the drum by hand as in a Sock or something is wedging the drum from turning?

...drum is hard to turn. If so, you may be able to determine if the problem is in the front or back of drum. Keep on mind that the noise might have been the belt slipping due to the drum being hard to ...

is not that is the belt a good tight fit on the drum??? is the motor turning? can you turn the drum by hand? if you cant turn the drum by hand its likley to be drum bearings stuck up or sezed up motor

...turn the drum. I read on another sight it could be a thermal fuse and that's why the motor won't move the drum? I need advice on how to procede. Thanks Sounds like this machine needs retirement~! Not ...

...turn the drum with your hand. It should be a little hard to turn. If it is reall easy to turn the drum then the belt is either off or broke. You can take off the top of the unit, and in the middle of ...