are not as easy as they appear. But beside the belt the support runners that support the drum my be bad. when you replace the belt, did you take the entire dryer apart and inspect it for more problems
...replace the drum belt: Step 1: Locate the belt by removing the back or front service panel. Depending on the type of dryer you own, you may have to prop up the drum to keep it from sagging. Don't let ...
...replace drum belt how to replace drum belt on compact Axxis Dryer The belt is acessable from the front of the dryer you can remove it by popping the top up then taking off the front of the dryer off ...
replace the drum and belt assembly, Check you drum rollers for flat spots, If they have flat spots on them replace them. I would also recommend that you lubricate your drum rollers with a good quality
...it broke,remove front panel and restring belt around the drum,then replace front drum piece that holds the drum in place and then string belt around idler and motor pulleys and replace front ...
...drum for belt wear marks, noting approximate location on drum where belt rides. Install replacement belt by routing through pulley arrangement (ridged side of belt rides againt motor pulley), then ...
...replace the belt you need to remove the drum.route new belt with ribs on motor pulley.and backside of belt on sping loades idler pulley Normally on a front load machine you would remove the front of ...
...replace it properly. If the old belt is worn or frayed, but not broken, leave it around the drum as a pattern for positioning the new belt; cut the old belt and remove it when the new belt is in ...
drum, replace the front part, with the door ( might lube the felt gasket with a little 3 in 1 oil (lightly), then from the bottom opening, move the tension pulley so it stretches the spring, until you
143 questions posted
Usually answered in minutes!
640 Questions
525 Questions
217 Questions
197 Questions
96 Questions