...replace the turbine, especially the first time because what needs to be removed can be a head scratcher. However goes easier the second time. The turbine can be taken apart once out and I have used ...
...replace the Turbine Gear for $32. Follow the link below. Hoover SteamVac Replacement Turbine Brush Gear Part # 91001097 replaces part numbers 43191006 and 43191018 Hoover F74XX Parts Link ...
...find a genuine hoover replacement part by following the link below. Hoover SteamVac Replacement Turbine Brush Gear Part # 91001097 F7425 Parts Link ...
...Turbine Brush Gear Part # 91001097 F7425 Parts Link http://www.usavacuum.com/Hoover-Steamvac-s/109.htm Make sure the ends of the brushes are not bound up with hair, lint and string, and that the belt ...
...replace or inspect The brushes are turning by an air driven turbine. The turbine has a pivot bushing made of steel inside of it that gets rusty because of the water that is running through it. The ...
...gear for your machine they are available at the link below. a 30 Turbine is much less expensive than a $200 new machine, Hope this helps. Turbine Brush Gear Part # 43191008 F5914 Steamvac Parts ...
...turbine gear will have to be replaced. You can access the turbine gear by removing the hood. You can find a genuine hoover replacement part by following the link below. Just find the model number of ...
...a genuine hoover replacement part by following the link below. Turbine Brush Gear Part # 43191008 F5914 Parts Link ...
...replace the black turbine, I can send you anything you need, or if you have any questions feel free to call 1561-848-3387 Thank you, Teresa. Clean sweep Vacuums Clean the small TURBINE filter under ...
...turbine gear shaft. Mine was rusted solid. I removed the washers and bearing and cleaned them up with a wire wheel being careful not to lose any of the tiny needles. Once evrything was rust-free, I ...
211 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions
