Hoover Steam Vac Dual V w/ SpinScrub Vacuum "releasing shampoo" Questions

releasing shampoo when the handle is lacked upright, when there is no water in the tank (the most common cause of this issue), or when water is not flowing through the machine because the sprayers are

...shampoo not releasing a seperate problem to the belt going? The problem did seem to start before the belt went.Have you any suggestions to try fix the release of the shampoo or is this terminal? if ...

NO WATER COMING OUT FOR SHAMPOOING /DUMPS WATER WHEN UPRIGHT My bissell proheat select 2x will dump water when standing upright/not in use, and will not release water when attempting to shampoo carpet

shampoo not releasing When we first start we can smell the shampoo. Then we see the water go thru but shampoo level never drops I had this same problem.  I fixed it by replacing the manifold ...

water and shampoo run out with the trigger in the off position In our Hoover Steam Vac Dual V widepath the shampoo and clean water run continually regardless if the trigger is pulled or not. It's ...

have a D4 model rainbow vaccum cleaner and want 2 no how 2 shampoo with it please help me put cleaning solution into the proper receptacle lower brushes making contact with the surface to be cleaned. ...

shampoo releasing I read the manual (troubleshooting) and did everything it told me to do and it still does not release water or shampoo. I have only used this three times it is only seven months old.

...shampoo machine, bissell. the ones that come with the machine BISSELL User's Guides can be downloaded at www.bissell.com On the front page under Customer Service click on User's Guides and enter the ...

...shampoo is only releasing from the middle of the tray width, one line. I've retightened everything and double-checked my manual to make sure I connected everything right. Can you help? Thanks. make ...

STEAM CLEANER QUIT WORKING iT WAS WORKING FINE AND THEN QUIT THE WATER AND SHAMPOO TANKS WERE FULL Could use a little more info about it but I would start by removing the tanks and checking to see ...