Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum "bottom vacuum" Questions

...vacuum bottom. Making a How to remove bottom of cover on vacuum bottom. Making a loud noise so don't know what the problem is. Hoover Fusion Cyclonic Filtration System on this model, the bottom does ...

...vacuum Hi There, The model number will either be located on the bottom or the back of the machine on a sticker that also contains the serial number. All vacuums have to have this sticker, and serial ...

...bottom of the vacuum, flip it to where you can see the bottom of the baseplate.  Only unscrew the recessed screws...4 to 5 screws.  Once you have removed those, the basepalte will pop ...

2 screws at the bottom of the vacuum. You will need to remove these 2 screws to be able to remove the bottom cover. Once the bottom cover is removed, you should be able to access the belt and agitator

Changing vacuum belt Can't figure out how to get top separated from bottom. You have to turn the vacuum over and remove the two small silver screws on the sides of the bottom plate.

...VACUUM before beginning any service procedure. Not knowing the name brand or model # most vacuums belt change from the bottom or by removing the top cover to change the belt for an upright, if you ...

they suposed to when cleaning the carpet, i notice that the brushes on the bottom of the vacuum were not turning Gee,is the belt broken? Take off the bottom cover and look inside. Un plug first,please

...bottom soleplate on the vacuum cleaner can easily be re-installed the incorrect way. If this happens the brushes on the vacuum cleaner can not even hit the carpet, which makes the vacuum feel like ...

...bottom I do have suction from the hose but almost nothing from the main vacuum. It won't even pick up a piece of lint. Check for a clogged airway between the bottom shoe and the hose inlet. The shoe ...

...vacuum to your right when looking at bottom). There are two rectangular holes, one on top above the wheel and one on bottom below the other wheel. Place a flat head screw driver in one of the holes ...