Question about Singer Sewing Machines
...bottom. Bobbin doesn't sit flat inside the bobbin case but spins with a tilt, lower on the left and higher on the right. Bobbin touches plastic cover plate. Bobbin tilts and spins unevenly resulting ...
...bobbin case correctly? There may be a diagram on the machine showing you the correct placement. When you replaced the needle, did you make sure the groove in the needle was facing the front of the ...
Question about Sewing Machines
...cleaned have tension both top and bottom when pull threads but machine is not making stitches. Normally incorrect lower bobbin placement. If things are not moving under there, you need
bobbin case is unable to grab on to the top thread so I can't bring up the bottom thread. What should I do? I think its an alignment problem but I can only remove the bobbin case but not the thing
...sew something the string on the bottom part of the material gathers....i tried playing with the tension adjustment but it didnt work Your help would be greatly appreciated First, make sure you have ...
...bobbin when you place it in the bottom, you have to thread it is as well to the part where the needle comes down and collects and goes back up. please re-look at instructions for placement of ...
Question about Janome Sewing Machines
...sew e.g. Top thread will not pick up bottom thread. have done all tension and threading and needle placement are as per manual and am looking for ideas as to what the solution could be. The machine ...
Question about Singer Sewing Machines
...sew. Things You'll Need Pen Screwdriver Push the bobbin-winding spindle of the sewing machine back to the left. Turn the hand-wheel toward you, hold the needle thread (thread on the sewing machine ...
...bottom thread. It seems like the bobbin didn't move at all. What shuld I do? Please help. Put your bobbin back in, look at your manual for placement. I think that your don't have yours threaded right ...
...bottom bobbin thread is gobbed up and won't let loose. I tried several times to fix the problem. I cleared the thread, checked the case for placement several times, adjusted the bottom bobbin thread. ...
107 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions