SINGER 7470 Sewing Machine "needle reaching bobbin thread" Questions

...needle pick up my bobbin thread 1. Either the needle is smaller than required and does not reach down enough to loop the bobbin thread.2. Or the bobbin thread is not kept out of the shuttle and does ...

needle does not reach bobbin to to pull bobbin thread on surface the needle does not reach the bobbin to retrieve thread up to start sewing Sewing machine needles are specific to each model. If the ...

Needle not reaching bobbin. I see a gap between the needle and the bobbin when I try to reach down for bobbin thread. Is this because the machine could be faulty or I will need a longer needle. Please

...needle reaching the hook at the wrong time to intercept the bobbin thread). Search for: sewing machine timing Elgin Model 2468 Sewing Machine Instruction Manual Viking engineered 1958 Elgin 2468 ...

...bobbin and holder. If the needle extends too far, it will jam. Not far enough and it doesn't reach the turning hook. Search the internet for web sites and videos regarding setting sewing machine ...

...needle is just not reaching the bobbin, so it is missing the bobbin thread. How did this happen (mid-sew, no less) and what can I do to fix it? This is on a Pfaff hobby 309 Have you changed your ...

needle runs just fine, but the bobbin thread just doesn't come up. Which model do you have? The needle needs to be inserted properly and the thread needs to pass through the eye in the right direction

bobbin cover, needle plate etc to expose hook. Turn hand wheel slowly towards you until needle reaches its very lowest point then continue to turn very slowly until needle comes up about 3/16" in this

needle and out bobbin in checked tension etc. when plain straight stitching the thread pulls out of needle. How do I correct this please? If you haven't already, install a brand new needle. Be sure to

...bobbin. The needle doesnt go through the hole to catch the thread at the bottom Please elaborate. Is the needle hitting the needle plate so it cannot reach the bobbin thread, or is the needle simply ...