...to the outlet first then check the power cord connection to the sewing machine could be something wrong with the power cord could also be something wrong with the motor also could be a wiring ...
Question about Juki Sewing Machines
...run and I cannot sew. What would cause this? there could be something wrong with the foot pedal, it may need to be serviced or replaced, or there could be something wrong with the plug where the foot ...
I am not drawing up the lower thread. what am I doing wrong? perhap bobbin in wrong so it runs in the reverse direction to what it should? Also, check the needle is in the correct position and not too
...it is not sewing stitches - the motor works and runs but no connection to the needle! What could be wrong? I just got the machine. Are my settings somehow wrong? I oiled my machine all the way but it ...
Question about Baby Lock Sewing Machines
...Run a few inches of chainstich off slowly, while watching the thread and loopers make the loops over the finger. Your threads may be in the wrong position, or underneath the wrong parts to
singer 301a that picks up thread on the wrong side I have a singer 301a that picks up thread on the wrong side of the needle. It runs smoothly without thread but picks up thread on the left side of ...
...bottom thread is bunching and knotting up while top stitch looks fine. upper tension/threading is wrong hello i am bobbin the thread, but the thread is not moving when i press the peddle (foot ...
Question about Janome Sewing Machines
i keep getting a message to rethread the sewing machine when there is apparentl nothing wrong. This message occurs even when running with no thread in. I have cleaned the bobbin holder, re threaded ...
Question about Husqvarna Sewing Machines
up I've oiled where I can -- still doesn't help. it's possible that somthing is wrong with the motor or a belt or eventhe foot pedalonly a sewing machine shop can tell you for sure
Question about Husqvarna Sewing Machines
...wrong with the foot. The symbol for the buttonho I have tried reinserting the pressure foot cord and it might run but when I stop it won't start again. Could it be a short in the cord or a ...
110 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions