Singer 132QRFB Mechanical Sewing Machine "bobbin clogging thread" Questions

...bobbin thread clog up and i need to find out how to thread machine right try using a new needle try a different bobbin just incase there is something wrong with the that one. make sure the bobbin ...

...clogging at the beginning of my sewing Try these suggestions 1. Change the needle--use a needle that's for the fabric being sewed 2. Rethread the machine--top --make sure to use every thread guide 3. ...

...bobbin clogging, squeaking after a lot of sewing. Ideas? With the embroidering, some of the bobbin thread is SUPPOSED to show on the top of your embroidery-the machine isn't doing anything ...

...left and then placed flat in the bobbin case). Usually if the thread bunches underneath your fabric it means that the TOP thread is threaded incorrectly. Try re-threading the upper thread. Good

...bobbin area is tangling up the top thread. the top thread never breaks it just clogs up in the bobbin compartment can you help? Be sure that when you thread the top thread, ALWAYS RAISE the presser ...

...before it clogs up again. i cleaned it and removed dust. still doesnt work. i maybe putting bobbin case in wrong coz it doesnt freely let the thread go up Check for the needle installed ...

bobbin that keeps clogging Try raising your top tension. Begin at four to start. Make sure you have the thread under the tension disc. Set the bobbin resistance to be equal to the top tension. This is

thread clogs up bobbin and knots up thread on back side of fabric immediately when starting to sew thread knots up and clogs up bobbib hi there, well, common problem when you didn't acquired right set

thread clog in bobbin case but I took out and cannot fine. How do I take apart to find thread bog? you might clean under the needle plate for lintand use a can of air in and around the bobbin area for

...bobbin that keeps clogging on my Bernini 130 It seems to run fine and then the bobbin clogs up and creates a mess on back You have a problem with a poor quality thread that frays. The other reason is ...