Juki DDL-8700 "oil pressure drops stop" Questions

FOOT PRESSURE BAR NEEDS OIL ALSO. INSIDE THE MACHINE THERE ARE MANY MOVING PARTS TO BE OILED AND CLEANED. TAKE THE MACHINE TO A PRO IF THE NOISE DOESN'T STOP AFTER YOU OIL THE ONES THAT YOU CAN GET TO

Stop motion knob has to be turned sometimes to get machine to run. What can I check? I have made sure the machine is oiled. check the belt it may need to be replaced. if you unscrew the screw for the ...

...pressure foot. Now, give a tug on the thread. Is the tension really hard or just average? You may need to lower the tension to stop the jamming of the bobbin thread. c. Clean the bobbin area. Check ...

oil on race and return the bobbin case. Recheck and set tension of bobbin. (Maybe replace thread). The bobbin can't be higher than the case. b. Raise the pressure foot. Thread the top as normal except

...not needing oil, but a very little on some of the moving parts helps. my machine has repeatedly stopped lowering the pressure foot completely, so doesn't feed. local repair isn't solving the ...

...pressure foot to the back and your ready to go.  Remember, top tension should be on 5 and bottom tension should be on the red 1, don't change it.  Brush out the bobbin holder assembly ...

...pressure onto it). Watch the thread going onto the bobbin and give it a nudge with your finger tip to ensure the thread fills top, middle and bottom of the core evenly, you don't want it all on ...

...pressure points, and I assume anyone who has the type of machine you have can tell you how to do it if you don't know. The cam looks to have a cam follower, which activates the clutch, which then ...

...pressure foot.  Place the thread spool on a spool pin so that the thread unwinds itself from the side nearest the machine. Pas the thread from below throu the thread guide then throu one of ...