Juki DDL-8700 "5550 timing" Questions

How do I time a Juki 5550? Never done it before, How do I time a Juki 5550? Never done it before, but would like to save a service call. -- Denise Having the suggested hook position from the manual is

My stitch is stuck on a small stitch and I can't make it bigger. Is my timing slightly out? Does this look like yours? JUKI DDL 5550N Handbook

The bobbin thread holder on the right side will not turn. go to the right side of machine and take cover off that is where the timing belt is and see if it is broke or something is holding it up

...5550. needle is broken again and again. how to adjust shuttle? Check that you have been using the correct needle for your machine and that it is installed correctly. If that all checks out, most ...

Hello. My sewing machine DDL 5550-6 display shows the problem. E7. What is it? And how do I fix it? Thank you HI THERE concern E7 there's many reasons : 1- machine jamd ( try to turn machine by hand ...

I have a Juki DDL-5550 sewing machine, i always face a problem when trying to fill the bobbin, the wheel that should spin to make the bobbin spin is not spinning, i some time give it a push with my ...

When i release the leg lever to let down the presser foot ,the foot wont release all the way and now it wont stitch Mine does this too sometimes. Lift up the head and look in the middle of the oil pan

...timing. First thing to check is if you've got the right needle system: http://partsbooks.sewingmachine.com/Instructions/Juki/Industrial/DDL-5550%20&%205530%20Instruction%20Manual.pdf and that the ...

...5550-6 Juki industrial model. I had problem inserting a new needle; I read the advice about inserting the scaff on the right, because my bobbin is inserted on the left. Now the thread continues to ...