Brother CS6000i Computerized Sewing Machine "damage wheels" Questions

motor is fine, but won't sew Hasn't been used for 20 yrs, hand wheel turns manually, have oiled everything, hand wheel starting to turn slowly although very stiff. needle barely moving up ...

brother overlock sewing machine the hand wheel hard to turn how can we fix this most of the time when the hand wheel is hard to turn, it needs to be serviced, to see if it needs cleaning or if there ...

...may have seized from dried oil. Probably needs a thorough cleaning and oiling. Continued use could damage the

my singer 9410 machine isn't working the wheel doesnt work anymore model 9410 when i step on foot petal it stopped working, i oiled machine and now if i try the bobbin threader that wheel will ...

the wheel is hard to turn brothercs 6000 since the wheel is hard to turn it could be a lot of things, like the belt, or a damaged or broken part, or a part needing adjustment, taking it to a repair ...

...the temptation to try to run the machine until the problem is taken care of properly. You could damage the motor. Wheel on right side that controls the needle up and down is very

hand wheel will not move Hand wheel will not move and neither will the bobbin case. Cleaned out lint from the bobbin case but the handwheel still won't budge. it would be a good idea to have ...

janome mylock 134d wheel won't turn I was serging a lot and suddenly it just won't go anymore. I press the pedal and the motor tries, but the wheel won't turn. I can barely hand turn it. I have dusted

...it tight enough to engage the hand wheel with the needle bar mechanism. However, you don't want to damage the unit. I hope this helps. Cindy ...

...bogged down from old, dry oil. If this is the case, continued attempts to run the machine may damage the motor. Take it for service or Wheel on right side that controls the needle up and down