...parameter change within the router to help this problem? Thanks Yes check this settings in your Router Setup Page. In your D-Link Setup Page. Go to Advanced Tab > Advanced Network Check the ...
Question about Belkin Computers & Internet
...internet even a 5mb package is not always that and I average 4.7mb with overhead to the real world (wan) It sounds like you are trying to "stream" to do that you need to make sure as many settings as ...
...is connected between your modem (Cable or DSL) and your computer. Connect the modem output to the WAN or Internet connector on your router. Connect any of the output connectors to your computer's ...
...wan config page is the mtu parameter u can change. you need to login into your router via the web browser... the easy way to find your ip address is to press start... they type run... press enter... ...
Configuring EDIMAX 6104 for Aztech 600E Router I have several computers connected to DSL through an EDIMAX router and a modem. Till yesterday I had an Alcatel modem, and everything was fine. Today the
Question about Linksys Computers & Internet
...down that modem, router, and your PC, Make sure your ethernet cable goes from your modem to the WAN, (not LAN!) port. Power up the modem, wait a full 2 min, power up the router, wait a full 2
WAN port of your Belkin. 2. Configure the LAN IP address of your Belkin in the same subnet as the Voyager. By example, if your Voyager has 192.168.0.1, you may give your Belkin 192.168.0.3. 3. Disable
Question about Linksys Computers & Internet
...2) In the left menu, click on Show advanced Settings. 3) In section Hotel, please click WAN. 4) Please set the following parameters: -- MRU = 1400 -- MTU = 1400 -- MSS = 1360 5) Click on ...
Question about Zyxel Computers & Internet
...setup? and press Apply 5. Following Screen will appear. Select ?Network" on the left. 6. Select ?WAN? and ?Internet Connection? Tab. After filling the parameters given in the windows, Press Apply. ...
...- only the host address). Thanks. most cable companies are dhcp configured. so you would leave the wan config as default. the only thing i would do is mask the computer mac address. this should give ...
1 questions posted
Usually answered in minutes!
3,968 Questions
1,852 Questions
952 Questions
689 Questions
416 Questions