kenmore chest freezer not working since yesterday my chest freezer is not working , I can hear it tries to kick in and in few seconds shutts down by itself. What do i check and how to fix it. I have ...
Question about Kenmore Freezers
...Kenmore 5 cu ft freezer that won't come on. I've checked the plug in and it works fine. Where would I start looking for the problem???? If, by plug in you mean the socket, then you need to check the ...
will not freezing suff what chid i do Check you thermostat controller and set it to maximum level. If not work check you compressor and compressor line there may be a Leakage . Repair it from a ...
...Kenmore Freezer 20.3 cu. ft. Frost Free Upright Freezer Quick freeze Mod. 253.9239716 DOM 5/95. the unit was working fine unit sunday night then the alarm light went on, the temp. has gone up to 60 ...
Question about Kenmore Freezers
...kenmore chest freezer model 19502/19702. I had it unpluged for 5 months. When I plugede it back in the power light flickers. Tryed other outlet. Other then that it seems to be working We purchased ...
kenmore 7.5 freezer stopped working. After unloading it I plugged it back in the compressor hummed about 20 seconds, then a click from a relay, and the compressor stops. About a minute later ...
...Kenmore upright M. 106 Manf 1-1992, type 18 avf92 frost free freezer. The compressor stopped and temp rose above 40F. Only drawing 10 watts. unplugged and after 5 min retried and its pulling around ...
Kenmore 5 freezer, model 253.9135180. It's several years old granted but was working fine until 2 weeks ago. I unplugged it because it was clicking every minute or so like it was trying to turn on. It
kenmore upright freezer quit freezing would work intermitantly and then quit cooling altogether, Approx 10 years old trouble shooting advise or most likely cause would be appreciated Sorry to read ...
Question about Kenmore Freezers
kenmore chest freezer, compressor hums, gets hot but not cooling well enough, The setting is at 5(1-7) and the temp is at 29 degrees, freezing but shouldn't it be around 0 degrees? I put a 3n1 ...
22 questions posted
Usually answered in minutes!
322 Questions
159 Questions
143 Questions
42 Questions