...verify that the wire at Plug 3, Terminal 2 on lower circuit board have DC volts v (9V or more) IGNITER First verify proper voltage at the positive (+) and ground (-) terminals of the ignitor.
...F. Now I have complete failure. The older units has a 3 VDC glow coil the newer units have a 12VDC igniter. Fromwhat your described above the next paragragh is your ignition system. The igniter ...
...hear the burner and feel the heat via the exhaust) for approx 30/40 minutes then it fails and the igniter switch clicks away but doesn't ignite. I think a reset of some sort is involved for if left ...
Question about Dometic Refrigerators
dometic rm4200 cant get gas to light igniter woks fine and there is gas when switch is pushed in it just will not light.Is there a jet missing thermal coupler is probably bad, the igniter will spark ...
Question about Dometic Refrigerators
My Dometic 2852 will not cool in gas mode. The igniter continues to click despite a small blue flame in the burner. I have take the gas valve out and cleaned it and removed the orifice and cleaned it ...
no ignition Dometic RM2652 igniter does not work. I lit ref manually and it runs and cools. Remove cover from igniter (follow thin wire from electrode,back to it) and test for 12 VDC at + terminal on ...
DOMETIC RM 7651l HAVE POWER AND GAS TO THE FRIDGE BUT WONT START (TWO MONTHS OLD) Igniting a Dometic gas fridge Electronic Ignition Open gas cylinder or pressure regulating valve Turn on Electronic ...
828 questions posted
Usually answered in minutes!
242 Questions
143 Questions
133 Questions
66 Questions
52 Questions