Kenmore Side by Side Refrigerator "compressor knock" Questions

...each cycle. The freeze, refrigerator, ice maker and everything is functioning normally though. The compressor, condenser coil for compressor, and controller board all are on top of the refrigerator ...

knock against the outside of the compressor case. The only "fix" would be a new compressor. However this does not actually indicates compressor failure and most likely will run many more years with no

...knock but now knocks more and more and getting louder. the knocking can range from 5 sec to 20 sec long and does it about every 10 minutes. there is no temp problems with the refer or the freezer, no ...

...a minute. It is starting to wake us up at night. Pull the fridge away from the wall and inspect the compressor. Your description sounds like the compressor is hitting something. It is rubber mounted ...

...compressor to knock loudly. You can confirm this. Pull your refrigerator out. Without unplugging, remove the bottom cover. Observe the compressor. You will see the compressor jerk and jump. It is ...

knock. I called Whirpool customer service since it is new and on warranty. They sent out a technician and he said the knocking is from gas/air built up in the copper tubing for the freezer because the

...the compressor are tight. Sometimes just tightening these bolts will solve a compressor knock problem. If that does not sure the problem try replacing the rubber cushions under the compressor

Kenmore Coldspot 69182990 - knocking noise When the compressor shuts down from running a cycle on our Kenmore Coldspot 69182990 refrigerator/freezer, it has begun making a loud knocking noise. Just ...

compressor to "knock": 1) It is positioned on rubber mounts and one of these may have become dislodged if the fridge was moved recently. Or one or more of the mounts may be worn, or the compressor may

knocks when cuts in and out compressor knocks when cuts in same when cuts out The internal motor support springs are broken or rusted inside the sealed compressor . The only way to stop the noise , is