Question about Xerox Phaser Office Equipment & Supplies
...print head not allowing it to move properly. Your print head is stuck. Either the print head block has gotten ink in it and will not allow it to tilt, or the print head wiper is tacked, ( stuck) to ...
Question about Xerox Phaser Office Equipment & Supplies
...variation is normal, occasionally occurs, and usually self-corrects within a few printed pages. If a print-quality problem is not resolved with the information provided in the Diagnosing ...
Question about Xerox Phaser Office Equipment & Supplies
...and green check the black cartridge, it may be out. If it is ok, print a test page to see it will print black. If it does not print black, there may be toner spill blocking the black toner
...message: 07,010.43:24426 The print head is not moving freely. The print head wiper may be tacked to the print head, or the print head block may be filled with ink causing the print head not to
...routine does not clear the blockages, then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later model and better printer than replace the print
Question about Xerox Phaser Office Equipment & Supplies
print-quality in the margins of SRA3 paper is not guaranteed. 4. Inspect the Accumulator Belt cleaner; replace the cleaner, if necessary. 5. Run the Remove Print Smears routine. From the front panel?s
Question about Xerox Phaser Office Equipment & Supplies
...not print duplex. From print command window, I choose "Properties" and then "2-Sided Print" from the 2-Sided Printing drop-down and then OK. Yet, it printed on 2 pages and not front & back of one ...
Question about Xerox Phaser Office Equipment & Supplies
...not have a duplex unit and cannot print double sided printing automatically. DOUBLY SIDED PRINTING WITHOUT A DUPLEX UNIT Open your Word document. Open page 1 - then Print the current page. Then put ...
not specified for this printer. To print the Troubleshooting Print Quality pages: Press the [Up] or [Down] arrow button on the Control Panel to select [Troubleshooting] on the Display Screen, and then
...I don't know how to fix it. When I go to print properties the tab for one or two sided printing is not active and stays at 1-sided (it's grayed out) goto printer property and select 2 side printing
109 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions