Question about Epson Stylus Office Equipment & Supplies
cannot get print head to move to renew ink Unplug printer electric cord. lift print head cover & manually slide over the heads attached to the bar.it won't break.
Question about Epson Stylus Office Equipment & Supplies
...will move to the center, then UNPLUG power cord, now you can manually move the cartridge check the ink cell which ink cartridge allway seating, there should be have a lot ink stick, just remove
...move the print head (gently) out of the way and see into the parking area. If there is a plastic rod sticking up, ull it gently towards you and it should snap down out of the way. The printer should ...
Question about Epson Stylus Office Equipment & Supplies
...Manually move the print head GENTLY back to its park position. The pump cap will try to raise up to meet the bottom of the print head as you move it back. Be careful no to force it or you may break ...
...head and manually move the head back and forth by hand to clean it. You may need several sheets of towel and alcohol to do this. Fold the paper thick enough so it will touch the head surface to
Question about Epson Stylus Office Equipment & Supplies
...Print head won't move to the left to take out cartridges. When printer switched on, head moves to the right and makes a lot of noise. Pressing the maintenance button does not move the head just makes ...
Question about Epson Stylus Office Equipment & Supplies
the Service menu. If this fails to clear your problem you can try to manually clean the heads but you may want to use Q-Tip's and Alcohol to clean the cartidge print head before you go to that expense
Question about Epson Stylus Office Equipment & Supplies
...move the print head.If the built-in cleaning functions don't seem to do the job then There are a few ways to clean your print head manually. Its technical because you need to open ...
Question about Epson Stylus Office Equipment & Supplies
...print' do three head cleqans don't move the printer or switch it off, now leave it overnight - letting the head soak in fresh ink- in the morning, do one more head clean and then print the nozzle ...
Question about Epson Stylus Office Equipment & Supplies
...of head cleaning mechanic). Connect to nozzle. Fill tube with cleaner. Move head to parking position. Do suction from outlet pipe of head cleaning. It's the safely way to clean print head
2,505 questions posted
Usually answered in minutes!
664 Questions
510 Questions
454 Questions
438 Questions
438 Questions