Epson 4880 Stylus Pro InkJet Printer "service print head error" Questions

...print. - service req.0001001b. I have no idea what this error is as I have only had the printer a couple of months. (I replaced my Agf sherpa with this) Can anybody offer any advise, and does anybody ...

...service" have tried reseting the protection counter but doesnt seem to work any ideas? look for anything jamming the print head, then try lubricating the bar the print head runs on. power off then ...

...service code again and the print head was able to move freely. I hope this helps. if you can do this follow these steps Check to make sure the locking bracket and screw have been removed from the ...

...print head issue; have it serviced or u can try this : How to Unclog Epson Print Heads 1.Check the printer icon whether it is 0 ready or not 2.Click start > run> services.msc > print spooler > right ...

service req 10037 print head Hello fddf, i have the same 10037 error code in my machine. On internet is says it is 00010037 Print Head thermistor error. I can not understand the problem and service ...

...necasary things that it needs to do to print, it is just not printing,ink is fine and shows no errors. Sounds like print head issue; have it serviced or u can try this : How to Unclog Epson Print ...

Service required error and flashing with all lights so I cannot print... How I can fix this problem ? You need to be able to clear the counters in the printer that tell the printer to stop working. In

I am printing blank pages, I have no errors and plenty of ink. Try this clean the head of the printer, through the menus on the servicing the printer. If that doesn't work take a compress air can, and

...print head to the right and after releasing the cutter rod, slide the print head all the way to the right. Power back on. Machine should reconfig and clear the service req. 00010004 error. Good

...Service required. Contact Epson." I printed a nozzel check pattern & segments were missing. I then cleaned the print heads. I still had missing segments. I was preparing to do another print head ...