...Fuser error. Replace fuser or if no-go, Main board. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response Thanks, ...
Question about OKI B Office Equipment & Supplies
...error: 010-349 That is a fuser error. Open the rear door. Remove and reseat the fuser. If this does not work, you will need a new fuser. If not that specific error, just let us know. Hope this
make sure the printer is plugged directly into the wall outlet not a surge protector also remove the fuser unit and reseat. If the error 173 message continues, the fuser unit will need to be replaced
Question about OKI B Office Equipment & Supplies
...FUSER TEMP ERROR, DO YOU KNOW HOW TO FIX THIS ERROR? OKI B2540 MFP IS GETTING A FUSER TEMP ERROR, DO YOU KNOW HOW TO FIX This is a common error especially if you have power surges or outages, before ...
oki b4350 error 173 OKI B4350 error 173 That is a temperature error with the fuser, most likely the thermistor. Really the fuser needs to be replaced. Hope this helps.
...fuser E error I have an Oki B6200 with replace fuser E error How do I fix this? The solution already posted does not work. I do not have a "paper menu" or next button "Paper Menu" "System Menu" ...
...error shows the time to replace another Fuser part. The Fuser was ruined if you print over maximum number of pages (200,000 pages for eg.). If not the component of printer's Fuser is ruined, such as ...
...error has been popping up frequently and this printer has just been replaced. Any ideas on this one? Please replace the fuser part. In almost case, this problem generally Fuser part has a problem. Or ...
Question about OKI B Office Equipment & Supplies
error issue your printer is facing means "Fuser STS Front Disconnection fail" First try to reset the printer by powering off and then on. If the problem still persists then you need to detect fuser or
How to solve "reboot printer (010-349)error in OKI B6300 printer This is a fuser disconnection error. Try to remove the fuser and put it back securing properly in its place.
43 questions posted
Usually answered in minutes!
103 Questions
111 Questions
28 Questions
50 Questions
30 Questions