...Cyan Cartridge will not print, and when another cartridge replace this cartridge, error on plasma scree, said does not detect cartridge(Cyan). Cleaning the contacts were the cart. rest on looked to ...
Question about Xerox Office Equipment & Supplies
...cyan cartridge isn't recognized The printer always say an error about the cyan cartridge, i've replaced with a new one, but always print the same error message that cyan cartridge must be replaced ...
...cartridge in the blue spot to see if you get the same message. If you get the same message then the machine is broken. If you get a new message then the cyan cartridge needs to be changed. Thanks, ...
Question about Xerox Office Equipment & Supplies
Cyan cartridge is OK, means that the display shows the level of toner in the cartridge, right? Then chip it is ok. Try another cyan toner, the printer may be that it has broken the opening flap of the
...cartridge XX(00=black, 01=cyan, 02=magenta, 03=yellow) is not engaged correctly. Since the error occurred after replacing the black cartridge, it's a good bet that the black is bad. Put the old ...
Question about Xerox Office Equipment & Supplies
...cyan,megenta & yellow images & print it, observe which colors are not printing,If back missed replace black cartrige, if any color missed out of remain three replace colour cartridge.There is ...
Question about Xerox Office Equipment & Supplies
...cyan cartridge for broken pieces and make sure the drum spins. if so, replace the cyan cartridge 2. Check that connections on the cyan print-cartridge drive motor and on the driver PCA are seated ...
...Cyan Toner Cartridge in the Toner Housing Assy and also check the auger under the Cyan Developer Assy. After sorting these out, you should get proper CMYK blue from the 10th or 12th page once you ...
Question about Xerox Office Equipment & Supplies
...Cyan cartridge or ribbon cable pinched. This is what I found on DepotTechSupport (so the solution isn't mine, just the searching) :-) 59.51, 59.61 ERROR ...
...cyan?. It might be damage/broken micro pump at head or short circuit. Replace head or buy new printer. not even a single drop of light cyn . i had performed NOZZEL-CHECH several times but no POSITIVE ...
32 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions