HP Color LaserJet CM1015 Printer "prints shades red" Questions

...prints too light, all the shades of red and pink are barely readable.Is there any way if I can fix this myself? The mirrors in the laser unit are dirty. The magenta is laser is the bottom one. Are ...

...shades of red, pink and yellow. I have changed the cartridges again, but no improvement at all. Can you help? Thanks Angela I would contact HP via phone on this one. They even have a support chat on ...

...prints shades of red. tried to clean and prime and still only prints red did you cleaned golden contacts on print head and cartridges with alcohol? if no, try it, other option is, that new cartridge ...

...shades of green usually indicate that the red is not printing properly. Self cleaning should take care of it red or yellow color nozzles are smuggled.you have to try to clean the printhead 1 or 2 ...

printers substitute the nearest available color when a color runs out or the head is plugged. As some shades of red are made with yellow mixed, it therefore prints only in yellow if red is unavailable

printing problems hi i am having problems printing photos with canon printer, photos are printing in a red shade, can you help? Ta Gail If your not low on ink try shaking the cartridges right before ...

5100 HP Desktop printer--magenta ink comes out pink not red (right out of sealed package!) magenta is just a fancy name for pink.... its usually a darker shade of pink not overly dark but not a bright

My DCP-115C printer was missing red colour. Every red colour was placed by yellow. Yellow is one of the colours used to produce a shade of red. I don't know how but ther must be a way to print a test ...

i have a canon pixma mp760 multifunction printer... when i print colour there are lines going through it a lighter shade than the main colour eg a block of blue has light blue lines thru it, red has ...

...prints the blue shades. The yellow and red colors do not seem to work. I just replaced the color cartridge. Maybe your printer need cleaning, do this from Properties > Maintenance, then print test ...