Question about Brother HL Office Equipment & Supplies
...Toner LED: Flashing Yellow Drum LED: Flashing Yellow Error LED: Flashing Red Go Button: Flashing Blue I've tried cleaning the corona wire, removing and replacing the drum, removing and replacing the ...
Question about Brother HL Office Equipment & Supplies
on then.error light means main PCB failure, Toner light means fuser failure, drum light means laser failure. Toner and error light means main motor error, drum plus error light means its a fan failure
Question about Brother HL Office Equipment & Supplies
drum" error. 2. Open the front cover of the printer as if to change the toner out. The printer will read cover is open. 3. Press the clear/back button or just clear. The printer will say "replace drum
...Toner, drum and paper lamps on and it hasn't warmed up. Does this mean I need to purchase a new printer. If all the LED's are flashing and continue to flash for more than 10 minutes with the unit ...
...Drum, Ready, Alarm and Data lights all flash at the same time. How can I clear the error message so that I can get the printers to print once again. Thank You Hello, This could mean one two things. * ...
Question about Brother HL Office Equipment & Supplies
...drum/toner, close up the front panel 3. Restart the machine off/on If thr noise is still there means its a mechanical part inside thr machine, if the noise hase gone then try this 4. Put the paper ...
...Toner/Drum/Paper LED#s are lit. 5. Release the GO button and check that all LED#s are off. 6. Press the GO button eight times. 7. The printer settings will be reset to factory default. 8. The printer ...
Question about Brother HL Office Equipment & Supplies
...toner, drum and paper. I have replaced the toner and added paper. But the lights on still flashing. When all of the lights are flashing like that it indicates there's a SERVICE CALL needed, that ...
Question about Brother HL Office Equipment & Supplies
...please replace the toner cartridge. 2>f the drum lite is blinking , it's mean the drum life near to end. In these case please replace the drum. I hope it will help to solve your printer
349 questions posted
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
188 Questions