My brother MFD-7440N Says Drum Error. I have replacing the drum twice with drums and still no luck. I have also done the coruna wire and made sure the blue tap is lined up with the arrows. There might
Question about Brother MFC Office Equipment & Supplies
printers have a cleaning routine, if not you can just print a picture on a full 8.5x11 page and make several copies until they clear up. If neither of these solutions work. Make sure that the drum was
Question about Brother MFC Office Equipment & Supplies
...issues that can cause lines vertically on the page: dirty corona wire or damaged drum, damaged toner, or dirty or damaged fuser. You should download the user's manual from Brother. The following ...
Question about Brother MFC Office Equipment & Supplies
...print is faded, toner is fine. What could the problem be? Most likely it is an issue with the Drum Unit. Start by cleaning the Corona Wire. There will be a slider on the top of the Drum Unit. ...
...issues. Take out the cartridge and clean its drum/ (green roller) with a dry, soft, lint-free cloth. The drum is usually located under a cover. Checkout for any spilled toner inside the printer and ...
Question about Brother MFC Office Equipment & Supplies
...issues. In this case it seems that magenta is the issue. Take out the cartridge and clean its drum/ (green roller) with a dry, soft, lint-free cloth. The drum is located under a cover. Checkout for ...
Question about Brother MFC Office Equipment & Supplies
issues like this are caused by the carona-drum-toner assembly. I have not worked on this model but the only way to diagnose the issue is to try a new drum / toner cartridge and see what impact it has.
Question about Brother MFC Office Equipment & Supplies
My drum is dusty. How do I get the dust off?I have an brother mfc 7420 Dust on drum is an issue with the corona wire. Use the blue tab on top of the drum unit. Slide it back and forth 10+ times and ...
"Drum error" message popping up. "Drum error" message popping up. I cleaned the corona wire and repaced the drum but the error message continues to pop up. This is a hardware issue.
497 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions