Brother MFC-9440CN Laser Printer "toner refill" Questions

toner life ended and then we got a refill. Earlier on refill, It was working fine, But this time it still says , TONER life end, replace toner. We tried loading 2 different refilled toners and cleaned

...new they read your toner cartridge, if you insert a refill toner cartridge, first you need to reset the toner cartridge, i think in the right side, or left please switch and back to normal

...toner cartridge out and want to refill it you7rself, DON'T. You can buy toner with about the right size grains, but Brother uses toner with grains that are much smoother and rounder than that ...

toner life ends I refilled the toner cartridge drum but the memory says " toner life ends". What to do? There are two units in the machine, a toner cartridge and a drum unit. The toner clips into the ...

...refill place to verify it has toner in it. The only solution that I can come up with is to remove the cartridge & drum unit for some time. When I insert back in, it will work but has the low toner ...

MFC 9450 - CDN shows toner end of life message. The cartridges had been refilled from bottles. This was solved by resetting the flag gear so the printer thought it had a new cartridge. See this link. ...

...Toner low - massege. But catridge is full. Catridge is refilled. shaking of cartridge does not solve problem. Thanks. The magic word is "refilled." Not all refilled cartridges work correctly. Try ...

It tells me tone life end, I replaced drum unit and toner and it still says life end try this. open the front cover, press the "options" button, then "start", then "1" then "0". once you see the ...

...refill it again with the proper toner,else u have fault at the toner sensor or the toner itself,else u have no connection between the cartridge and the M/C DC controller, else your M/C DC controller ...

...toner refill people, reset the counter (Reset Gear)). I just refilled one and found out the hard way that there was a lot of toner left in the cartridge. Also I found that by turning the power on and ...