...Put drum unit and toner cartridge assembly back in machine, but do no close front cover. Press Clear/Back You will get a message "Replace Drum?" Select Yes to confirm Drum error means dust on drum ...
Question about Brother MFC Office Equipment & Supplies
Put the toner back to the drum, make sure that it clicks, Reinstall the drum and toner back to the machine, 6. Close the cover. If the display still shows drum error, go ahead and do the drum reset. 1
...put the cartridge and drum unit in) Press the Back Button Display reads "Replace Drum 1. Yes 2. No" Press the number 1 The display reads "Accepted" Close the Front Cover If you have not replaced the ...
Question about Brother MFC Office Equipment & Supplies
drum unit. Put the toner cartridge firmly into the new drum unit you hear it lock into place. If you put the cartridge in properly, the green lock lever will lift automatically. Caution Make sure that
drum unit but the machine keeps telling me that I still need to replace it. You can disable this message. Turn on while press Menu. You have enter in "service mode" Put code 10 Put code 31 (after WSW)
...unit and toner cartridge assembly Put drum unit and toner cartridge assembly back in machine, but do no close front cover. Press Clear/Back You will get a message "Replace Drum?" Select Yes to ...
it very well. Moved that blue tap thing of the drum back and forth a few times. put it all back together and into the machine. Turned it back on. And WOO HOO it finally worked. Thanks for all the tips
Question about Brother MFC Office Equipment & Supplies
...drum, put back the starter sheet in with the flat edge toward you. Turn the drum left gear to get the sheet in till the plastic notch are even with the edge of the sheet. The put back the drum in the ...
Question about Brother MFC Office Equipment & Supplies
...drum unit. Put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put it in properly, the lock lever will lift automatically. Put the drum unit and toner ...
Question about Brother MFC Office Equipment & Supplies
...put in the new drum and it still says needs drum replaced Simply open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to reset ...
439 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions