Question about Brother HL Office Equipment & Supplies
1/2 inch from right side. Dots are not lined up horizontally in the same row. Blues are slightly above the red dots. Equal spacing vertically, just a tad over one inch between each dot, so about 10 on
Question about Brother HL Office Equipment & Supplies
1/8-inch long) at right hand edge of paper. They are spaced at about 2.5 inches apart down the page. Help! It is most likely that your Laser Unit is failing. It could also be dirt on the electrodes of
Question about Brother HL Office Equipment & Supplies
...1 1/2 inches is a narrow blank line across the page? Could this be a drum problem or a toner problem.. please help.. Thank you Means toner cartridge is nearly to end. Just shake a little bit to ...
Question about Brother HL Office Equipment & Supplies
error printing on brother hl 2040 series theres a 1 inch thick line on the right side of the paper when you print........ how can i take that out? Check blue slidy thing on drum is in home position ...
inches give or take a little and the same each time in a line it's probably the drum is damaged. If they are closer like 1-3/8" to 1-1/2" it will likely be the toner cartridge. If it spaces out a more
Black Vertical Line on the paper when ever i print something theirs always a black vertical line about 1/2 an inch thick that starts on the bottom of the page and then fades away right before it get ...
Question about Brother HL Office Equipment & Supplies
when i print there is a vetical faded space/line down the page. i have changed tone but it does not help. any suggestion? Use a dry towel with the toner removed, and wipe the 1 inch wide window above ...
Question about Brother HL Office Equipment & Supplies
my brother hl 4040cn is printing fine, except there is a blank vertical line in the middle of the page. what is this? Usually just toner dust on the laser lens, you remove the toner and drum and look ...
Question about Brother HL Office Equipment & Supplies
...1/2 inches from the left edge of the paper. I have rocked the toner from side to side and tried to clean the corona wire by sliding the blue tab as instructed in the toner directions. No help. Thank ...
...inches, for example). The only solution to this problem is to replace the drum. For most low-cost home printers, the drum is part of the toner assembly and is automatically replaced each time you ...
694 questions posted
Usually answered in minutes!
1,072 Questions
422 Questions
377 Questions
249 Questions
188 Questions