...dots about 3" apart vertically on the left side of the paper. They are about 1/2" or so from the left margin. Printer only 2 months old. Called tech support, cleaned everything they suggested. What ...
...dots on paper. Funny, I had the same thing. I took out the drum unit and removed the carrtridge, then slowly turned the drum, using the gear wheels at the end. Eventually I noticed a pale dot on thge ...
Question about Brother HL Office Equipment & Supplies
paper. These dots may be called as "Garbage Valley" This means ur printer has got lots to print but it was stopped due to certain reason. I'll ask u to go through ur printer manual & print atleast
...dots on the pages when printing. I have cleaned all parts as well as I can. Does anybody have any idess You might need a new toner or ink. if it is a copier, check to see if there are specks on the ...
Question about Brother HL Office Equipment & Supplies
...dots, smudges or paper spec#s on the drum surface cylinder. 17. If you see something out of the ordinary, please try to gently (do not scrub or use wiping motion, because this may damage the drum), ...
...dots on the left hand side of the paper and now there has been black smears with each print. I changed the printer cartridge to see if that would help, There are still dots and the smears are more ...
Question about Brother HL Office Equipment & Supplies
...dots are very fainted. The printer gives no signal of any problem. Please help me why. Thank you. turn on/off, unplug, wait a minute, plug back in, should reset. take all paper out. check to see if ...
Question about Brother HL Office Equipment & Supplies
When I print I, the paper has black dots. How can I fix it? Re-align your printer or change the ink. The user manual will describe how-to do this.
...dots on the right side of the paper that get printed. They run throughout the paper, generally in different spots on different papers though. Thanks in advance for any assistance. shivan, did you ...
...dots on the right side of the paper. What is causing this or how can I fix? Try running about 20 prints through it. That usually cleans up the overspill that can occur when installing new
694 questions posted
Usually answered in minutes!
1,072 Questions
422 Questions
377 Questions
249 Questions
188 Questions