You may have other printer as the default printer currently. Check your connections again. Connect it to another USB port as the current port might not be responding due to connection contact problem
check. Also a bad connection with the drum unit. If that is not it you may have a high voltage problem. I would first pull out the drum and look for anything like a piece of paper inside with my flash
...Check connectors for connection. 4 Scanner Motor turns when the Start key is pressed. NO Check connectors for connection. Change motor. Change Scanner Motor Drive Board. 5 I/O check for Scanner Home ...
Question about Kyocera Office Equipment & Supplies
check this by looking for the scanner icon in the bottom right corner, if it's not there click on start, all programs, scanner user software, scanner file utility, click on Scanner Utility to bring it
Question about Brother HL Office Equipment & Supplies
...connection. Ensure that the scanner is getting power If your scanner is not getting power it is recommended that you check the connections ensuring that they are connected properly to the back of the ...
...board (SCB). 1. Turn the product off, and then on. 2. Check the scanner controller board LEDs. 3. Check the connections to the scanner controller board. 4. Replace the scanner controller
scanner will not connect to PC I have a Kyocera CS-2550 and when I try to scan I get error message unable to connect to PC; check PC. Everything is connected but I do have a inconsistent red flashing ...
...detection sensor or scanner drive motor...... Has anyone had problems like this ???? It can also be the ribbon cable connecting the scanner to the formatter board. Check that it is connected
...scanner driver and reinstalled it, no change. HOW CAN I GET THIS THING TO SCAN??I use windows vista and when I check out under scanners in control panel, its recognised and doesnt show any problems ...
...Check the connection of connector YC4 on the scanner PWB and the connector on the scanner home position switch, and the continuity across the connector terminals. Repair or replace if necessary. ...
694 questions posted
Usually answered in minutes!
1,072 Questions
422 Questions
377 Questions
249 Questions
188 Questions
