Question about Lexmark X Office Equipment & Supplies
...keep that cover closed.if that cover is closed still its showing the same error.then the sensor which detects the cover closed is got moved from its orignal position.to reset the sensor ...
Question about Lexmark X Office Equipment & Supplies
peper jam sensor arm has dislodged how do you get it back in the paper jam sensor switch arm has dislodged from the bracket how do you get it back in Peter Smith: You'll have to open the ...
Question about Lexmark X Office Equipment & Supplies
...procedures from lexmark. If it doesn't help, then the problem might be either faulty cover sensor (which is just a simple switch that is pressed when the cover is closed), displaced sensor ...
...paper jam but there is no paper jamed in it Sometimes there is little bits of paper stuck inside a sensor causing the printer to detect a jam. Use an air duster can to and shoot some air at all the ...
...the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor ...
...you so my apologies in advance if you have already know this. Paper jam errors are a result of a sensor being tripped in the paper path, a problem on the electronics board or a problem with the ...
...the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor ...
Question about Lexmark X Office Equipment & Supplies
I am getting a paper jam message but there is no paper in the printer Check your paper passege sensors, may the actuator is boken or one of sensors is dirt. Use blower to blow off dust.Hope this ...
Question about Lexmark X Office Equipment & Supplies
lexmark x656de erro 929.03 service toner sensor Please try to use a spare toner, if you have tried using the spare toner and you still get the same error, this maybe a sensor issue (40X4370 Sensor). ...
Question about Lexmark X Office Equipment & Supplies
...closed -- error message will not disappear Open the cover, and look carefully -- there is a small "sensor" that should be activated as you close the door. If the sensor is malfunctioning, then it ...
9 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions
