...base. WAITING HANDSET REGISTRATION shows in the display. 4. Press the flash/program button on the handset until LINK BASE? shows in the display. 2NO is the default setting. 5. Press 1 on the handset ...
...flashing stops, all handsets are inhibited from connecting. However, the handset still appears to be connected to the base unit. Pressing talk will give an ?Unable to connect? message. To re-register ...
...flashing stops, re-register the handsets to the base. Re-Register a Handset to the Base 1. Remove Handset Battery. 2. Reconnect battery while holding down "*" and "#" key. 3. Then press the right ...
Question about AT&T Lands Phones
...base for about 10 seconds (until the IN USE light starts to flash), then release the /HANDSET LOCATOR button. Immediately press /HANDSET LOCATOR while the IN USE light is still flashing. (The light ...
...base turns on and starts to flash), then release FIND HANDSET . Press and release FIND HANDSET again. (You must press FIND HANDSET while the IN USE light is still flashing. The IN USE light flashes ...
flashing stops, re-register the handsets to the base.Re-Register a Handset to the Base 1. Remove Handset Battery. 2. Reconnect battery while holding down "*" and "#" key. 3. Then press the right upper
Question about Lands Phones
...base, but the 2nd handset message light does not flash even if it is on the cradle. I have unplugged both phones several times to no avail If the message light on the Telstra cordless handset 1 is ...
...Base Whichever handset you choose to charge in the base is automatically registered to the base. Any additional handsets must also be registered to the base before you can use them. Be sure both ...
...flashing base 1, cannot go to setup menu, not changed pin code, turned off and on, removed batteries, turned off base unit, waited 20-30secs for all of above and still handset is flashing base 1. ...
16 questions posted
Usually answered in minutes!
60 Questions
15 Questions
14 Questions
11 Questions