Dell 1800MP Projector "blink" Questions

...thing every time it's turned on. Anyone had the same problem with a simple solution? the number of blinks determine the problem: Environment Over Temperature- 1 long blink / 1 short blink DMD Over ...

red light blinking... These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. ...

after green blinking goes out, image appears for 10 -30 seconds, then goes off and red light starts to blink. Sequence is 4 blinks, very short pause, then again 4 blinks. Lamp has been in use for only

...bulbs. Unit powered up correctly and turned on like normal. Then Lamp1 and Lamp 2 indicator lights blinked (Indicating Start UP). After some period of time, it switched to Red 6 times blink (Lamp ...

powers on for only a few seconds power light blinks red and green and system does not power up and lamp does not power on if the power light blinks and the status light is off, check the lamp door. if

status is blinking constantly don't understand what to do. fan error how to resolve it? These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON

changed bulb for epson brightlink 455wi but its still blinking red Is it just one light blinking red or all 3 blinking red? Be sure to 'reset' the bulb hours. Try another bulb. If it is all 3 lights ...

Projector keeps shutting off by itself When i power on the projector it starts to fan on then turns off and blinks all the lights except the Lamp/shutter light is solid orange. I have replaced with a ...

...within ten minutes. the lamp turns off after a few minute and the red temperature light starts to blink. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur

...I have a vivitek qumi q2. It runs for about one minute and the turns off followed by a series of blinking lights on top, 3 blinks, pause, two blinks. It is getting warm so I think it may be a fan ...