ViewSonic PJ558D DLP Projector "replace replacement lamp" Questions

...Lamp replacement counter reset?" will appear. Select "Yes" and then press OK or ">" button8 Another confirmation dialogue box appears, and select "Yes" to reset lamp replacement counte.** Do not ...

bulb how do I replace the bulb? What is the procedure? remove the lamp door, remove the lamp (2 or 3 screws), replace with new lamp, replace door, reset lamp timer (menu-settings-reset lamp timer-yes)

...set properly. replace the lamp cover and tighten the screw. 5. connect ac power turn on te projector and go to the menu select lamp counter make it zero Replacement lamp type number is : POA-LMP90 ...

how do i replace the lamp remove the lamp door, remove the old lamp (2 or 3 screws), replace with new lamp, replace door, reset lamp timer (menu-settings-reset lamp timer-yes).

how do i replace the lamp remove the lamp door on the bottom, remove the lamp (2 or 3 screws), replace with new lamp, replace door, reset lamp timer (menu-settings-reset lamp timer-yes).

...replace lamp I've replaced the lamp, reset it and it works. But now, each time I go to use LCD, it displays replace lamp and has to be reset to omit message. You must normally use the remote control ...

replacement lamp is also available. -------------------- Buying original lamp is always advisable.But there is compatible lamp also available.The original lamp housing is costly and compatible housing

...and lamp light are green for replaced bad lamp, power and lamp light are green for about 1 min then turn red ,but the lamp does not come on at all Yes you need to replace lamp,so you buy a new

Our projector indicates that the light bulb needs to be replaced after replacing the light bulb once it still indicates that it needs to be replaced. This is the excerpt from the manual on how to ...

error message after replcing lamp data proj,. replacing lamp for data-projector pt-l 720e.I replaced the lamp but still the message "replace lamp " shows up You have to reset the lamp timer.