...light is blinking. The blinking lamp light indicates that there is a problem with the bulb. Mine did this when I had used the bulb past it's life and the bulb was burned out. Use the owner's manual ...
...light are green. Then to goes into stand by mode power goes to blinking orange, status goes blinking red ( fast blinking) & it shuts off. this is an NEC VT 660 about 3 yrs old. the lamp has been ...
Question about Sony Office Equipment & Supplies
...light blinking 4 times after few second of power ON SOLUTION: Remove the filter and then remove the upper cover check fans and fan connector if all fans are OK then remove the fan connector and ...
Blinking Red Light On my projector. I plug it in, and the power light just blinks red. Nothing else happens or works. I took it apart and everything looks all right, and the fuse works. But I don't ...
blinking light fan not working and ideas? I had the same problem with the blinking red light on my PG-M20X. I looks as if realy RL701 on the main power board is the problem. I removed the cover of the
Question about Sony Office Equipment & Supplies
Both the LAMP/COVER and FAN/TEMP indicator lights come on, not blinking Have been using this projector for several years on the road. Unit has worked flawlessly. Suddenly both the LAMP/COVER and ...
Question about Sharp Office Equipment & Supplies
...blinking red power light. It looks as if realy RL701 on the main power board is the problem. I removed the cover of the relay and cleaned the contacts. Despite the contacts being worn down it worked ...
Question about NEC Office Equipment & Supplies
blinking status light (.5 sec on, 2.5 sec off) indicating a lamp housing or cover error. yes it was the problem of broken tab - which is holding micro switch of lamp was broken when removing the cover
Question about Sharp Office Equipment & Supplies
...blinking red light on the PG-M20X. Below is the solution that I posted a couple of years ago: The RL701 relay on the main power board is the problem. I removed the cover of the relay and cleaned the ...
Question about NEC Office Equipment & Supplies
light is blinking red: 1 time- lamp cover or housing error. check lamp door. 2 times- temperature error. 4 times- fan error. one or more fans bad. 6 times- lamp fails to light. if lamp is new, ballast
58 questions posted
Usually answered in minutes!
75 Questions
41 Questions
27 Questions
39 Questions
25 Questions
