Question about NEC Office Equipment & Supplies
...by pressing the help button for more than 10 sec. Nothing happened. Got another remote, did the same, and the projector started working again. ???? same kind of remote, and ok batteries in
I just replace a lamp on Sony vpl-cs20 and lamp timer is still high You should turn on the VP-CS20 with the button on projector, NOT THE REMOTE or the instructions wont work. Using the remote ...
...remote. help unfortunately, you need the remote. fortunately, you can use almost any sharp projector remote (same code). when you do get one, press (in this order)- menu, enter, enter, menu, undo, ...
...help Try to do this, press the ENTER button on the TV and the MUTE button on the remote at the same time. After 5 seconds the screen should come up and it will read "Lamp use time...Total lamp use ...
...Try pressing more on the power button. if all else failes, you can get the remote repaired at replacementremotes.com also make sure there is no infared interferance around. I hope this
Question about NEC Office Equipment & Supplies
...help me out of this situation change the lamp even if the old lamp use original nec remote contro l6. After you install a new lamp, select the lamp Usage icon and press and hold the "Power On" button ...
...hold for ablut 5 seconds that should do it.. dont try pressing reset then execute. it seems to do nothing. gotta use the remote reset button. hope this helps. i know how annoying the message box
...lock" is automatically set to "OFF" The above process does not release the key lock .Please help. I do not have a remote . When I press menu and hold it down it alternate between searching and ...
i turn the remote receiver off i was browsing the menu in the projector and acidentally i turned the remote control off.now i cant turn it on. I think he turnerd the remote sensor off in the menu, if ...
Question about NEC Office Equipment & Supplies
...remote Hello Thank you for using FixYa for your problem you need to enter factory Menu. You do so by doing the following: 1).Start the projector. 2).Press keypad and keys simultaneously, enter " Lamp ...
58 questions posted
Usually answered in minutes!
75 Questions
41 Questions
27 Questions
39 Questions
25 Questions